Insulation removal in Portola Valley, CA
When you hear about home insulation, several homes need to be insulated.
When you want to save on the energy bill, all you need is to install an insulation material.
There are different parts of your home that needs to be insulated.
For example, you should insulate the attic and rodent proof.
When you insulate the attic, you will significantly reduce the heat loss.
You will also need to insulate the crawl space.
The code of the crawl insulation states that you will need to leave the vent so that to allow free movement of air.
People also consider the insulation of the basement.
When you have a basement, you should consider the basement as a living room.
When heating the basement which is not insulated, you will have to pay more.
Hire a company to help you with all kind of insulation.
Cost-Effective Spray foam insulation
If you have nothing stored in your basement, then there is a chance that you don’t visit the place regularly.
It is easy to neglect it and forget to inspect it from time to time.
There is a lot that can go on in your basement without your knowledge.
The place can flood; it can harbor pests and rodents or even have mold growth.
For these reasons, it is essential that you insulate your crawl space.
Crawl space insulation
There are several factors to consider when looking for the most appropriate way to insulate your crawl space.
Any type of insulation may not be ideal for a crawl space.
If you want to make your home more energy-efficient, then finding the best insulation is not an option.
Here is a guideline to follow when insulating a crawl space
Clear the crawl space
The first thing to do when installing insulation in your crawl space is determining whether there is an already existing insulation.
If the answer is yes, then you will need an expert to remove the insulation together with a vapor barrier.
Ensure that the insulation is sealed off properly to prevent debris and dust from entering your home.
Also, you will need to clear the crawl space of anything store there and clean off the debris.
A reputable company should have your back on this.
Seal off the leaks
Air leaks are the biggest enemy against achieving an energy-efficient home.
Therefore, once you have the crawl space cleared, the next thing you do is seal up all the air leaks.
Use low expanding foam insulation to seal the holes.
Also, to eliminate harmful contaminants and bacteria from the crawl space, you can use Expel fog.
This is a non-toxic and anti-microbial odor neutralizer that will also prevent rodents from entering your home.
Before suing any insulation on your crawl space, it is good to check the R-value of the material.
Use insulation with a higher R-value since it has a higher thermal resistance.
The size of the cavities in your crawl spaces will help you determine the insulation R-value to go for.
For huge holes, it will require more efficient insulation.
Be cautious with the insulation.
Make sure you install properly; otherwise, it will lose its effectiveness.
Ensure it fits inside the joists accurately.
However, do not over compress it since it will reduce its insulating abilities.
When you are done installing the insulation, use twines or lattices to hold the insulation into place
Install a vapor barrier
Moisture problems are prevalent in crawl spaces.
However, not all will have this problem, especially when you have a good crawl space drainage system.
If you have moisture problems in your crawl space, consider installing a vapor barrier.
A crawl space can accumulate a lot of moisture from the soil. With time mold will grow.
This can be hazardous to your family’s health, not forgetting a risk of structural damage.
A vapor barrier will prevent moisture from being absorbed by the insulation material.
Also, it will act as a barrier against pests looking for access to your home.
For long-lasting results, encapsulating your crawl space is advisable.
Here you install the vapor barrier on every surface of the crawl space.
Also, you can use vapor barriers together with dehumidifiers. Dehumidifiers help to remove moisture.
Ensure you choose the right dehumidifier.
For this, you can consider the size of the crawl space and the climate at your place.
Dehumidifiers will help to maintain balanced temperatures and moisture levels in your crawl space.
This will mean no mold or mildew growing in your crawl space.
You can always turn the dehumidifier off when you fill the condition of the crawl space is desirable and only turn on when necessary to reduce energy waste.
Water mediation and flood prevention
Crawl spaces are susceptible to getting flooded during rainy seasons.
If this is the case, you will need to pump out the water.
For spare yourself the hustles of pumping out water during all rainy seasons, install a sump pump and French drains.
Then, dig a trench around the crawl space and lay pipes on the trench.
The pipes will direct water to the lowest pint of the crawl space.
The pump will then get the collected water outside your home to a gutter system.
You can install a backflow device to prevent the water from flowing towards the direction of your home when water levels rise.