Fremont Insulation Contractor
When you want to install insulation in your wall, floor, or the attic, you may consider using the rolled batt.
The rolled batt can be made from different material, and they are easy to install.
Most homes use the rolled batt for many home insulation due to its benefits and comfort.
It is cheap and effective, and it is mainly made from fiberglass and stored in a roll that’s the word rolled batt.
During the installation of the rolled batt, you will need to hire someone who is experienced and knows what they are doing.
When you employ a substandard contractor, you will not get the desired results.
Some considerations need to be addressed during the process that only experts understand.
When you have an attic leaking since there was poor installation, rolled batt is recommended as it fixes the leak perfectly.
An overview of spray foam insulation
Do you wish to make your home more cost-effective?
Are you looking for a way to keep the energy bills in your home at a minimum?
Well, adding a layer of insulation to your walls, attic, and crawl space might be what you need.
With an added layer of insulation in your home, your house becomes much more energy-efficient.
As a result, you have cooler summers and warmer winters.
With an active layer of insulation, the heating and cooling cost in your home reduces, keeping your home comfortable.
However, to achieve this, you need the services of a professional and registered insulation installer.
In Fremont, Atticity Insulation is the company to call. We offer a wide range of insulation services that include:
- A glimpse on spray foam insulation
- Attic Insulation
- Air sealing
- Crawl space insulation
- Roof rat-rodent control
Home Insulation in Fremont
Spray foam insulation comes in two forms.
There are open-cell and closed-cell insulation.
The closed-cell spray foam sets into a rigid solid, which adds structural support to your walls and roof.
It has a higher R-value, compared to the open-cell spray foam insulation.
The R-value is higher because once sprayed into position; it expands into all crevices in your wall or attic.
As a result, it slows down the movement of heat thought it.
It also has impeccable moisture and noise barrier properties.
On the other hand, is open-cell spray foam insulation.
It is less dense, thus cannot be used for structural support.
Since it has a lower R-value, you need to install a thicker layer of the open-cell spray foam to achieve the same level of insulation as the closed-cell insulation.
The most common form of insulation used for attics is the R-30 and R-38 fiberglass and mineral wool.
If you have a standard loft, then you can buy the batts, usually 16′ and 24′ full. With enough headroom space and fewer obstructions in your attic, then you can go for the blanket or batt type of insulation.
However, if you have some hard to reach spaces, small headroom, and a lot of obstructions such as vents in your attic, then blown-in insulation might be a good alternative.
Creating a thermal envelope in your attic is a good plan if you intend to regulate the heating and cooling in your home.
With proper attic insulation, you can expect your energy bills to drop by up to 40%.
When it comes to air sealing, there are a lot of precautions to take to ensure that you do not suffocate your home.
Also, when it comes to small gaps around hot things such as chimneys, then you need to be careful.
For instance, rather than applying spray foam to fill the gaps, you need a fire sealant.
Without the correct measures, you might end up burning your house down or poisoning yourself and your family.
avoid all the inconveniences that come with DIY air sealing, get the services of a professional installer.
When you visit us, we assure you of the best services.
We ensure that all ceiling vents have a seal, where they meet the ceiling.
Crawl space insulation
Do you need to insulate your crawl space from moisture and cold during the extreme weather?
Do you wish to have the job done quickly, effectively, and at an affordable rate?
Then, reach out to us today.
Whenever you want to install insulation in your crawl space, you need a material that will cover the whole place.
If you have some vents down there, then blown-in insulation is the way to go.
However, if you use the batts, you will need to lay some poly for moisture protection. However, if you choose spray foam, with its moisture barrier properties, you do not need the poly.
Call us today and have a cozy underfoot for your family for the winter.
Roof rat-rodent control
It is quite hard to achieve rodent control if you have no idea where they have the most activity.
Also, it might be hard if you cannot reach the spots. However, that should not compromise your health and safety.
With a professional rodent control expert, you can easily find a method that works to get rid of the rats.
Whether we need to figure out the number of traps that are required or where to position them, do not hesitate to call us.
We also help you to create a rodent-proof home by sealing off any entry points to your home.
Reach out to Atticity Insulation from anywhere in Fremont, and be sure to receive the best services.