Insulation in Atherton

How to order energy efficiency services in Atherton, CA

1.

Contact Us

Call, send an e-mail, text or fill out the contact form.

2.

Free Estimate

Schedule a convenient time to meet & get a free estimate.

3.

Schedule

Get it done today or later, upon your request.

Atherton Insulation contractor

When you want to insulate the attic and the ceiling, blown –n is what you should choose.

Unlike the rolled batts which are blanket-like, the blown-in is more of material blown on the surface for insulation.

It does not work best on the walls, but it’s perfect for the ceiling and attic.

The Blown-in is more of a method of insulation which can use different material such as different types of foam, cellulose, loose fiberglass fiber, and other natural fiber pellets.

When it comes to the installation, it is more expensive compared to the rolled batt because it has to be done by professionals.

The R-value of blown-in is about 3.6 to 3.8 per inch.

The major drawback of using the blown-in is that when it is subjected to high temperature, its shoulders.

Spray foam insulation solutions

Many benefits come with the choice of spray foam as your form of insulation.

For instance, if you choose to use spray foam on your walls or roof, you enjoy high energy efficiency around your home.

With the foam insulation being much better than conventional methods of padding, you get to save significantly on your energy bills.

Additionally, with spray foam insulation, then you can expect solid insulation ever.

Compared to fiberglass, which sags and settles after some time, the efficiency of spray foam remains high all the time.

Unless you take your time to press down on the open-cell spray foam insulation, then you can be sure to enjoy its benefits for a long time.

Call Atticity Insulation today and get the best spray foam insulation solutions in the market.

Wall Insulation
Insulation of basement with fiberglass of house with insulation material

House Insulation in Atherton

Winters are cold and harsh.

Unlike the summer, they need more caution and expenses.

If you are not well prepared for the season, you might find yourself spending a lot of money to keep warm.

Alternatively, if you choose to wear a lot of clothes and turn the thermostat dial down, you end up tired from carrying all that weight around.

Hence, home insulation.With proper insulation in Atherton, you get to save up to 40% of your total energy bills that’s not in the summer, but also the winter.

You cut down on the furnace fuel, keep the rooms heated for longer, and your floor becomes a bearable underfoot.

At Atticity Insulation, we offer a wide range of insulation services. These include:

  • Spray foam insulation solutions
  • Blown-in Insulation
  • Air sealing
  • Wall insulation
  • Rodent control

Blown-in Insulation

Are you in the middle of the construction and need to put some insulation in place?

Do you have an already existing building that needs some insulation in the attic or wall cavities?

Is your crawl space so small that you cannot reach down to put in batt insulation?

If the answer is yes, then there is an alternative.

Blown-in insulation offers a faster way to improve your home’s insulation significantly.

Whether you want to add to an already existing insulation or put a new one, then blown-in insulation gets the job done.

Besides, with the right choice of material, you can achieve the required R-value in a short time, while spending less to purchase the material.

All you need is professional help with the blowing equipment, and you will be set for the winter.

Air sealing

During construction, there is little that the contractors can do to eliminate the gaps left behind.

For instance, if you need a roof installed in place, there are bound to be some nail and screw holes left behind.

As a result, you start to lose some of your heat through the holes.

Also, if there were wrongly-sized HVAC vent holes, then there will be holes all over your home.

The good news is, there is something you can do to ensure your home is airtight.

With professional air sealing services from Atticity Insulation, then you stand to enjoy better living conditions.

With the AC working for shorter hours and not as much to achieve the same results, then you are bound to save a lot of money on your heating and cooling expenses with an air sealing service.

Wall insulation

attic insulation replacement
controlled temperature in winter and summer

Different homes require different ways of insulation for the walls.

While some require exterior wall insulation, others need it interior, while others need the cavities between the walls filled.

Wall insulation is a good aspect of not only increasing the worth of your home but also creating a more comfortable indoor living space.

However, before you invest, you need to consider the total benefits and cost going into the service.

Some insulation services might not be worth the investment.

However, if you are conscious about an energy-efficient home, then insulating your home is a viable investment.

Choose Atticity Insulation today and create an eco-friendly home by insulating your walls.

Rodent control

Are you looking for a rodent control service provider who not only deals with the current situation but also works to prevent future infestations?

Then, you need to schedule a home inspection with the experts from Atticity Insulation.

Rodents are not only harmful to human health, but also property and pets.

You will notice a gradual increase in your heating and cooling bills when there is a rodent infestation in your home.

That is because they chew on the insulation, damaging it and reducing its R-value.

Call us today and get quality rodent control services anywhere in Atherton.

Atherton Insulation contractor

When you want to insulate the attic and the ceiling, blown –n is what you should choose.

Unlike the rolled batts which are blanket-like, the blown-in is more of material blown on the surface for insulation.

It does not work best on the walls, but it’s perfect for the ceiling and attic.

The Blown-in is more of a method of insulation which can use different material such as different types of foam, cellulose, loose fiberglass fiber, and other natural fiber pellets.

When it comes to the installation, it is more expensive compared to the rolled batt because it has to be done by professionals.

The R-value of blown-in is about 3.6 to 3.8 per inch.

The major drawback of using the blown-in is that when it is subjected to high temperature, its shoulders.

 

Sights From Atherton, CA

Atherton Insulation contractor Atherton, CA
ensure that it is more energy-efficient Atherton, CA

About Us

AttiCity is a family owned company. We are located in San Jose, but our crew is ready with all the necessary equipment & replacements to give you the best attic services all over the Bay Area, CA.

Tips & Links

Recent Posts